Support for Sport Mode Kit – Color PPF Accent for Model Y Juniper Complete installation guide and support resources for your Sport Mode Kit – Color PPF Accent for Model Y Juniper
Read Before You Install Please review these critical points to ensure a successful installation:
Surface temperature must be between 60-80°F (15-27°C)
Clean and degrease the surface thoroughly before application
Work in a dust-free environment to prevent contamination
Allow 24-48 hours for full adhesion before washing
Use proper tools that were provided Surface temperature must be between 60-80°F (15-27°C)
Clean and degrease the surface thoroughly before application
Work in a dust-free environment to prevent contamination
Allow 24-48 hours for full adhesion before cleaning
Use proper tools that were provided/li> Installation Guide Maintenance Troubleshooting
1 Surface PreparationProper surface preparation is crucial for a successful installation.
Isopropyl alcohol (70% or higher)
Microfiber towels
Lint-free cleaning cloth Isopropyl alcohol (70% or higher)
Microfiber towels
Lint-free cleaning cloth
Slip solution (mix of water and baby shampoo)
Squeegee 2 Video Tutorials VIDEO
Installation Video Installation Guide
VIDEO
Installation Video Installation Guide
Maintenance & Care Cleaning Instructions
Hand wash with pH-neutral automotive soap Avoid automatic car washes with brushes Use soft microfiber towels for drying Do not use abrasive cleaners or wax
Long-term Care
Park in shade when possible to prevent fading Apply ceramic coating for added protection Inspect edges regularly for lifting Address damage immediately to prevent spreading
Cleaning Instructions
Hand wash with pH-neutral automotive soap Avoid automatic car washes with brushes Use soft microfiber towels for drying Do not use abrasive cleaners or wax
Long-term Care
Park in shade when possible to prevent fading Apply ceramic coating for added protection Inspect edges regularly for lifting Address damage immediately to prevent spreading
Common Issues & Solutions
